Earthquake calculator

Earthquake Magnitude ↔ Energy Calculator

Earthquake energy grows about 32 times for every whole step in magnitude, because the energy relation in the U.S. Geological Survey (USGS) magnitude table is log₁₀ E = 1.5M + 4.8 with E in joules. A magnitude 7.0 earthquake releases about 2.0 × 10¹⁵ joules. Enter a magnitude, an energy, or two magnitudes to compare.

Earthquake Magnitude and Energy Calculator

Energy released by a magnitude 7.0 earthquake2.00 × 10^15 Jabout 477,000 tons of TNT · 2 PJ
  1. log₁₀ E = 1.5 × 7 + 4.8 = 15.3
  2. E = 10^15.3 = 2.00 × 10^15 J
  3. Same energy in ergs: E × 10⁷ = 2.00 × 10^22 erg (USGS form: log₁₀ E = 11.8 + 1.5M)
  4. TNT equivalent: E ÷ 4.184 × 10⁹ J per ton = 477,000 tons

Uses the energy relation in the USGS magnitude types table, log₁₀ E = 1.5M + 4.8 with E in joules. It gives a rough estimate of the radiated seismic energy; the USGS measures energy directly from the waveforms when it reports an energy magnitude (Me).

Long fresh fault scarp cutting across a dry grassy plain at sunrise, with the ground offset in a sharp step
A fault scarp marks where the ground slipped during an earthquake; more slip on a larger fault means a larger magnitude.

At a Glance

To find earthquake energy, compute 10 raised to (1.5 × magnitude + 4.8); the answer is in joules. Each whole step in magnitude means 10 times the ground-motion amplitude on a seismogram and about 32 times the energy. A magnitude 8.7 earthquake releases about 22,387 times the energy of a magnitude 5.8.

Energy formula
log₁₀ E = 1.5M + 4.8 (E in joules)
One magnitude step
10× amplitude, about 32× energy
Step of 0.2
About 2× energy
Modes
Energy, magnitude, compare two quakes
Magnitude range
−3.0 to 10.0
Formula source
USGS Earthquake Hazards Program
On this page
  1. Earthquake magnitude and energy calculator: energy, magnitude or comparison
  2. How to Use the Earthquake Magnitude Calculator
  3. What Does Earthquake Magnitude Measure?
  4. What Is the Formula for Earthquake Energy?
  5. How Do You Calculate the Energy of an Earthquake?
  6. How Do You Find the Magnitude From the Energy?
  7. How Much Bigger Is Each Step on the Magnitude Scale?
  8. Earthquake Magnitude and Energy Table
  9. How Accurate Is This Earthquake Energy Calculator?
  10. Related Earthquake Calculators and Pages
  11. Common Misconceptions
  12. Key Facts
  13. FAQ

How to Use the Earthquake Magnitude Calculator

The calculator has three modes. Energy from magnitude turns a magnitude into the seismic energy released, in joules, ergs and tons of TNT. Magnitude from energy runs the formula backward. Compare two magnitudes tells you how many times larger one earthquake is than another, both in ground-motion amplitude and in energy.

Magnitudes from −3.0 to 10.0 are accepted, the same range as the USGS "How much bigger" calculator. Negative magnitudes are real: sensitive instruments record tiny quakes far too small to feel. For energy you can type joules (J), the multiples kJ to PJ, ergs, or tons, kilotons and megatons of TNT.

Each answer comes with its steps, so you can follow the logarithm by hand. To learn how a magnitude is measured in the first place, start with our guide to earthquake measurement.

What Does Earthquake Magnitude Measure?

Magnitude is a single number for the size of an earthquake at its source. The USGS stresses that an earthquake has one magnitude, while its shaking varies from place to place with distance and ground type. Shaking at a given spot is described by intensity, which our magnitude vs intensity page explains.

Charles F. Richter introduced the idea in 1935 for California earthquakes, using the largest wave on a seismogram and the distance to the quake. His Richter scale works best for small, nearby events, so today the USGS reports most earthquakes with the moment magnitude scale, which is based on the fault area, the slip and the strength of the rock. Moment magnitude was designed to roughly match Richter's values where the two overlap.

For a sense of scale, a USGS booklet calls magnitude 2 about the smallest earthquake people normally feel, and magnitude 8 or more a great earthquake. The USGS describes a magnitude 5.3 as moderate and a 6.3 as strong.

What Is the Formula for Earthquake Energy?

The USGS magnitude types table gives the energy relation as log₁₀ E = 11.8 + 1.5M, with the energy E in ergs. One erg is 10⁻⁷ joule, so subtracting 7 from the constant gives the joule version: log₁₀ E = 1.5M + 4.8. Either form says the same thing: the logarithm of the energy rises by 1.5 for each step in magnitude.

The relation was written for surface-wave magnitude and gives a rough estimate of the energy radiated as seismic waves. The USGS also offers a second rough conversion from moment magnitude, log E = 5.24 + 1.44Mw. For a magnitude 7.0 the two give 2.0 × 10¹⁵ J and 2.1 × 10¹⁵ J, close enough for comparison but a reminder that these are estimates.

The calculator uses the energy relation from the USGS magnitude types table, rewritten from ergs to joules. Rearranged, it turns an energy back into a magnitude.

log10⁡E=1.5M+4.8
What each symbol means
SymbolQuantitySI unit
Eradiated seismic energyjoule (J)
Mearthquake magnitudeno unit (1)

Rearranged to find another variable:

M=log10⁡E−4.81.5

Valid for: USGS Magnitude Types table gives log10 E = 11.8 + 1.5M with E in ergs (written for surface-wave magnitude); with 1 erg = 10^−7 J this is log10 E = 1.5M + 4.8 in joules; a rough estimate, and the USGS also gives log E = 5.24 + 1.44Mw.

How Do You Calculate the Energy of an Earthquake?

Three steps turn a magnitude into energy:

  1. Multiply the magnitude by 1.5.
  2. Add 4.8. The result is the base-10 logarithm of the energy in joules.
  3. Raise 10 to that power. For tons of TNT, divide by 4.184 × 10⁹ J per ton, the factor listed by the National Institute of Standards and Technology (NIST).

A scientific calculator does step 3 with its 10x key. Because the exponent grows by 1.5 per magnitude, the answers climb very fast: a magnitude 4.0 releases about 6.3 × 10¹⁰ J, a magnitude 9.0 about 2.0 × 10¹⁸ J. The example below works a magnitude 6.0.

Example 1 Energy of a magnitude 6.0 earthquake

How much seismic energy does a magnitude 6.0 earthquake release, in joules?

  1. Given:
    • Magnitude: M=6
  2. Formula: E=101.5M+4.8
  3. Substitute: M=6
  4. Answer: E=6.31×1013 joules

1.5 × 6 + 4.8 = 13.8, and 10^13.8 is about 6.31 × 10¹³ J. Dividing by 4.184 × 10⁹ J per ton gives roughly 15,100 tons of TNT.

How Do You Find the Magnitude From the Energy?

Rearranging the formula gives M = (log₁₀ E − 4.8) ÷ 1.5, with E in joules. Take the base-10 logarithm of the energy, subtract 4.8 and divide by 1.5.

This mode is handy for comparing earthquakes with other energy sources. Keep in mind that it describes only the energy carried away as seismic waves, not every form of energy released when a fault slips. Our guide to earthquake energy looks at where that energy comes from.

Example 2 What magnitude matches one kiloton of TNT?

One kiloton of TNT is 4.184 × 10¹² J. What earthquake magnitude releases the same energy by the USGS relation?

  1. Given:
    • Energy (1 kiloton of TNT): E=4.184×1012 J
  2. Formula: M=log10⁡E−4.81.5
  3. Substitute: E=4.184×1012 J
  4. Answer: M=5.214

log₁₀(4.184 × 10¹²) is about 12.62, so M = (12.62 − 4.8) ÷ 1.5, or about 5.2.

How Much Bigger Is Each Step on the Magnitude Scale?

Magnitude is logarithmic, so the difference between two magnitudes, ΔM, matters more than the numbers themselves. The USGS explains it in two parts:

  • Amplitude: each whole step is a tenfold increase in the wave height measured on a seismogram, so the ratio is 10ΔM.
  • Energy: each whole step releases about 32 times more energy, actually 101.5 or 31.6, so the ratio is 101.5 × ΔM.

Small steps add up quickly. The USGS notes that a change of 0.1 in magnitude is about 1.4 times the energy, and our formula shows that 0.2 doubles it. Two whole steps mean 100 times the amplitude but 1,000 times the energy. The table below lists the common steps, and the example works the USGS comparison of a magnitude 8.7 with a 5.8.

Example 3 How much bigger is a magnitude 8.7 than a 5.8?

Compare the energy released by a magnitude 8.7 earthquake with that of a magnitude 5.8 earthquake.

  1. Given:
    • Larger magnitude: M1=8.7
    • Smaller magnitude: M2=5.8
  2. Formula: E1E2=101.5(M1−M2)
  3. Substitute: M1=8.7,M2=5.8
  4. Answer: E1E2=22,387

The difference is 2.9, and 10^4.35 is 22,387 when rounded to a whole number. The USGS works the same example: 794 times bigger on a seismogram and 10^4.35 = 22,387 times the energy.

What a difference in magnitude means for amplitude and energy
Magnitude differenceAmplitude ratio (10^ΔM)Energy ratio (10^1.5ΔM)
0.11.261.41
0.21.582.00
0.53.165.62
1.01031.6
2.01001,000
3.01,00031,623
4.010,0001,000,000
Source: Computed from the USGS relations of 10× amplitude and 101.5 (about 32×) energy per whole magnitude step (earthquake.usgs.gov/education/how_much_bigger.php, retrieved 2026-10)

Earthquake Magnitude and Energy Table

The table gives the energy released for whole magnitudes from 2 to 9 and for the largest earthquake ever recorded, the magnitude 9.5 1960 Valdivia earthquake in Chile. Every value was computed with the same formula the calculator runs.

The jump from row to row is always the same factor of about 32. By the formula, one magnitude 9.5 releases about 5,600 times the energy of a magnitude 7.0, since 10^(1.5 × 2.5) is about 5,623. That gap is why the handful of events on our list of the largest earthquakes in history stand so far above everyday quakes.

Seismic energy released by earthquakes of different magnitudes
Magnitudelog₁₀ E (E in joules)Energy (joules)TNT equivalent
2.07.86.3 × 10⁷about 0.015 tons
3.09.32.0 × 10⁹about 0.48 tons
4.010.86.3 × 10¹⁰about 15 tons
5.012.32.0 × 10¹²about 480 tons
6.013.86.3 × 10¹³about 15,000 tons
7.015.32.0 × 10¹⁵about 480,000 tons
8.016.86.3 × 10¹⁶about 15 million tons
9.018.32.0 × 10¹⁸about 480 million tons
9.5 (1960 Chile)19.051.1 × 10¹⁹about 2.7 billion tons
Source: Computed with log₁₀ E = 11.8 + 1.5M (ergs) from the USGS Magnitude Types table (usgs.gov/programs/earthquake-hazards/magnitude-types, retrieved 2026-10), 1 erg = 10⁻⁷ J, 1 ton of TNT = 4.184 × 10⁹ J (NIST SP 811); 1960 magnitude 9.5 from USGS
Bar chart of the base-10 logarithm of earthquake energy in joules: 9.3, 10.8, 12.3, 13.8, 15.3, 16.8 and 18.3 for magnitudes 3 to 9
Each magnitude step adds 1.5 to the logarithm of the energy, which means about 32 times more energy per step.

How Accurate Is This Earthquake Energy Calculator?

We checked the calculator against the numbers the USGS publishes. For a magnitude 8.7 compared with a 5.8, the USGS gives 794 times the amplitude and 22,387 times the energy; the calculator returns 794.3 and 22,387. One whole step gives 10 and 31.62, and a step of 0.1 gives 1.26 and 1.41, matching the USGS rules of thumb of 1.3 and 1.4.

The energy values themselves are estimates. The USGS calls the magnitude-to-energy conversion rough and reports a separate energy magnitude, Me, measured from the full waveforms, which can differ from the moment magnitude of the same earthquake. Use this tool to compare sizes and orders of magnitude, not to pin down the energy of a specific event.

Our magnitude calculator checked against USGS published values
Test caseUSGS valueCalculator result
M 8.7 vs M 5.8, amplitude794 times794.3 times
M 8.7 vs M 5.8, energy22,387 times22,387 times
One whole magnitude step, energyabout 32 times (101.5)31.62 times
A step of 0.1, amplitude and energyabout 1.3 and 1.4 times1.259 and 1.413 times
Source: USGS, How much bigger is a magnitude 8.7 earthquake than a magnitude 5.8 earthquake? (earthquake.usgs.gov/education/how_much_bigger.php, retrieved 2026-10)

Common Misconceptions

Myth: A magnitude 8 earthquake is twice as strong as a magnitude 4.

Science: The scale is logarithmic. Four whole steps mean 10,000 times the amplitude and about a million times the energy.

Myth: Each step on the magnitude scale means 10 times more energy.

Science: Ten times is the amplitude on a seismogram. The energy grows about 32 times per step.

Myth: Magnitude tells you how hard the ground shook where you live.

Science: Magnitude describes the earthquake at its source. Shaking at a given place is intensity, which depends on distance and local ground.

Key Facts

  • The USGS energy relation is log₁₀ E = 11.8 + 1.5M in ergs, which is log₁₀ E = 1.5M + 4.8 in joules.
  • Each whole step in magnitude means 10 times the amplitude on a seismogram and about 32 times the energy.
  • An increase of 0.2 in magnitude roughly doubles the energy released.
  • A magnitude 7.0 earthquake releases about 2.0 × 10¹⁵ joules of seismic energy.
  • A magnitude 8.7 earthquake releases about 22,387 times the energy of a magnitude 5.8.
  • The largest earthquake ever recorded, in Chile in 1960, had a magnitude of 9.5.
  • Magnitude 2 is about the smallest earthquake people normally feel; magnitude 8 or more is a great earthquake.
  • The USGS reports most earthquakes with moment magnitude, not the original Richter scale.
Did you know? Earthquake magnitudes can be negative. The USGS "How much bigger" calculator accepts values down to −3.0, for tiny quakes that only sensitive instruments can detect.

Frequently Asked Questions

How do you calculate the energy of an earthquake from its magnitude?

Use log₁₀ E = 1.5M + 4.8, with E in joules. Multiply the magnitude by 1.5, add 4.8, and raise 10 to that power. For a magnitude 6.0, 1.5 × 6 + 4.8 = 13.8, so the energy is 10^13.8, about 6.3 × 10¹³ joules.

How much more energy is released with each magnitude step?

About 32 times, or exactly 10^1.5 = 31.6 times, for each whole number. Two steps give 1,000 times the energy and three steps about 31,600 times. The ground-motion amplitude on a seismogram grows 10 times per step.

What is the Richter scale formula?

Richter's 1935 local magnitude is based on the logarithm of the largest wave amplitude on a seismogram, corrected for the distance to the earthquake. Each step therefore means 10 times the amplitude. Energy follows a separate relation, log₁₀ E = 1.5M + 4.8 in joules, which this calculator uses.

Can I convert moment magnitude (Mw) to the Richter scale?

There is no exact formula. The USGS designed moment magnitude to be roughly equal to Richter's local magnitude where both scales work, mostly for moderate quakes. For large earthquakes the Richter scale saturates, so the USGS reports moment magnitude. Our calculator accepts either as M for energy estimates.

How much TNT is a magnitude 7 earthquake?

Using log₁₀ E = 1.5M + 4.8, a magnitude 7.0 releases about 2.0 × 10¹⁵ joules. At 4.184 × 10⁹ joules per ton of TNT, that equals roughly 480,000 tons, or 480 kilotons. The comparison covers seismic wave energy only and is a rough estimate.

How much bigger is a magnitude 8 than a magnitude 6?

Two magnitude steps make the ground-motion amplitude 100 times larger and the energy about 1,000 times larger, since 10^(1.5 × 2) = 1,000. Put another way, it would take about 1,000 magnitude 6 earthquakes to release the energy of one magnitude 8.

What is the largest possible earthquake magnitude?

The largest recorded is magnitude 9.5, in Chile in 1960. The USGS estimates that a magnitude 10 would need a fault about 14,000 km long slipping 30 m, and calls a magnitude 10.5 highly unlikely because it would need about 80,000 km of fault. This calculator accepts values up to 10.0.

Sources

The energy relation comes from the USGS Magnitude Types table, the amplitude and energy ratios and the 8.7 vs 5.8 example from the USGS "How much bigger" page, the magnitude descriptions from USGS Earthquake Hazards Program pages, and the TNT factor from NIST SP 811; all table values were computed by us. Text, diagrams and illustrations are original work by Magma Tribune.

Magma Tribune Editorial Team
Written by our editors and checked against USGS, NOAA, NASA and Smithsonian Global Volcanism Program data. Every number in a table comes from a cited dataset, never from memory. Read our editorial policy. Last updated October 2026.